The Steinjager Long Arm kit includes the following:

(2) Double Adjustable Front Lower Control Arms with 1.25 x 1.00 inch chrome moly heims with high misalignment inserts and rubber boots. Arms made from 1.75 inch OD x 0.250 inch wall DOM Tubing.

(1) Double Adjustable Front Upper Control Arm with a 3/4 x 3/4 inch chrome moly heims on one end, and a clevis on the other end, clevis and heim bolts, high misalignment inserts and a rubber boot for the heim included. Arm made from 1.50 inch OD x 0.120 wall DOM Tubing.

(2) Double Adjustable Rear Lower Control Arms with 1.25 x 1.00 inch chrome moly heims with high misalignment inserts and rubber boots. Arms made from 1.75 inch OD x 0.120 inch wall DOM Tubing.

(2) Double Adjustable Rear Upper Control Arms with 3/4 x 3/4 inch chrome moly heims with high misalignment inserts and rubber boots. Arms made from 1.50 inch OD x 0.120 inch wall DOM Tubing.

(2) Chassis Mounts - one for the left side, and one for the right side.

(1) Transmission Cross Member for Manual Transmission (removable)

Installation time required: Estimated 20 to 30 hours, including welding of chassis mounts. An alignment will be required after installation.

Video Link of our Long Travel Kit: https://www.youtube.com/watch?v=0lXIUgPbUEA&feature=youtu.be

Video Link of a Jeep TJ Wrangler with all our parts installed: https://www.youtube.com/watch?v=lteSpEkMo_8

Does not fit the TJ Unlimited (LJ)

CAUTION REGARDING PAINT COLOR: This product is painted with our Hot Pink powder paint. Given the nature of this particular color and our powder painting process, there may be slight imperfections in areas around welds, at 'hanging' points from our powder paint system, variations in the color itself in areas with a dramatic change in materials (ie: from tube to large plate transition areas), and/or a loss of brightness after a season in direct sunlight.