NOTE: THESE ARE BARE METAL (ie: NOT powder coated). If you want a powder coated part, please refer to one of our many powder coated parts.

The Steinjager Long Arm kit includes the following:

(2) Double Adjustable Front Lower Control Arms with 1.25 x 1.00 inch chrome moly heims with high misalignment inserts and rubber boots. Arms made from 1.75 inch OD x 0.250 inch wall Chrome Moly Tubing.

(1) Double Adjustable Front Upper Control Arm with a 3/4 x 3/4 inch chrome moly heims on one end, and a clevis on the other end, clevis and heim bolts, high misalignment inserts and a rubber boot for the heim included. Arm made from 1.50 inch OD x 0.120 wall Chrome Moly Tubing.

(2) Double Adjustable Rear Lower Control Arms with 1.25 x 1.00 inch chrome moly heims with high misalignment inserts and rubber boots. Arms made from 1.75 inch OD x 0.120 inch wall Chrome Moly Tubing.

(2) Double Adjustable Rear Upper Control Arms with 3/4 x 3/4 inch chrome moly heims with high misalignment inserts and rubber boots. Arms made from 1.50 inch OD x 0.120 inch wall Chrome Moly Tubing.

(2) Transmission Chassis Mounts - one for the left side, and one for the right side.

(1) Transmission Cross Member for manual transmission(removable)

Installation time required: Estimated 20 to 30 hours, including welding of transmission chassis mounts. An alignment will be required after installation.

Video Link of our Long Travel Kit: https://www.youtube.com/watch?v=0lXIUgPbUEA&feature=youtu.be

Video Link of a Jeep TJ Wrangler with all our parts installed: https://www.youtube.com/watch?v=lteSpEkMo_8

Does not fit the TJ Unlimited (LJ)

IMPORTANT NOTE REGARDING BARE METAL PARTS: This item is shipped as raw, bare metal. It is highly susceptible to moisture and will likely develop minor surface rust during transit. This is entirely normal and does not effect the structural integrity of the part. You will need to clean, prep and coat (paint, powder coat, or oil) this part immediately upon arrival to prevent further corrosion.